Fronius CrashBox mag CMT PAP FL Installationsanleitung Seite 7

General
General
Device concept The CrashBox magnetic is designed specifically for fitting to the robot arm and for holding
gas-cooled and water-cooled robot drive units. The welding torch hosepack runs through
the CrashBox and then through the robot arm.
Scope of supply
(1) (2) (3) (4)
The CrashBox magnetic is a safety device
for robot welding. In the event of a collision,
the CrashBox sends a signal to the robot
control, which stops the robot immediately.
The torch holder on the CrashBox protects
the welding torch from damage should a
collision occur.
(1) CMT mounting bracket
(2) 2-part locking ring *
(3) One-ear clamp *
(4) 3 x cylinder screws M4 x 16 mm
(5) Magnetic plate
* Fitted to the CMT mounting bracket
(1) on delivery
(5)
7