Ending The Massage; Interrupting The Massage; Chip-Cards; Accessories - Wellsystem RELAX Gebrauchsanweisung

Please read and observe ...

Ending the massage

The massage will be terminated automatically after the set massage time
has expired.
Attention!
It is possible to damage the nozzle trolley.
Only lie down on the device or leave it when it is at rest.

Interrupting the massage

– Press the Start button once:
The massage pressure will drop considerably. The nozzle trolley will
take the shortest route to either the head or feet end of the massage
unit and will continue to run there, but at reduced pressure.
Do not get off the massage unit the nozzle trolley has reached one of
the end positions. The massage time will keep running.
– Press the start button once again to restart the massage.
Terminating the massage before the time has expired
– Press the start button and hold it down for 3 seconds:
The nozzle trolley will move up to the head end of the massage unit
and it will then be switched off.

Chip-cards

Chip-cards 01 - 03
Wellsystem chip-cards 01 - 03, on which different programs are stored,
are available as accessories – see Page 48.
Note:
Any massage time setting can be entered prior to starting when
using a chip-card (up to the maximum default time permitted).
The massaging pressure can be decreased or increased at any
time whilst the unit is working.
The type of massage cannot be changed!
Service-card
The service-card is used to call-up information regarding the unit and for
modifying the default settings, e.g. the water temperature – see Page 59.
41