Maintenance Tasks Carried Out By The Operator; Maintenance Work Carried Out By Experts - Wellsystem RELAX Gebrauchsanweisung

Please read and observe ...
Plastic surfaces
For cleaning the other plastic surfaces, it is best to use warm water and
a leather cloth. Never use aggressive cleaning agents containing alcohol,
e.g. the commercially available Sagrotan, or essential oils. These may
lead, in the long run, to damages not covered by the guarantee.
Note:
Prevent damage to the acrylic glass and plastic surfaces. Re-
move rings, watches, bracelets etc. before the start of cleaning
work.

Maintenance tasks carried out by the operator

Venting
3 days after start-up or filling the tank, it should be vented – see page 54.
After this, venting is unnecessary unless leakages occur and the tank
has to be topped up.
Topping up the tank
If there is significant loss of water (puddles on the base) please inform
Customer Service - see page 2.
Refer to page 55 for instructions on topping up the tank.

Maintenance work carried out by experts

Extreme danger!
The device must be deenergised when performing maintenance
work requiring the opening of the device.
See Page 35.
Note:
The maintenance work should be carried out in accordance with
the wellsystem
02756 / 0
The correctly carried out inspection work can be entered and
confirmed in the checklist – see Page 64.
Refit any safety devices (e.g. switches) after the work has been
completed.
_Relax customer service checklist.
TM
33