Operation; Starting The Massage - Wellsystem RELAX Gebrauchsanweisung

Please read and observe ...

Operation

Massage is understood to mean treating the entire body or just individual
body parts by kneading, pounding, rubbing, stroking and application of
friction
Hydrostatic pressure, which can severely overburden the circulatory
system during water treatment, is completely eliminated when using the
wellsystem _Relax. The patient does not come into direct contact with
TM
the water jets, therefore the risk of waterborne infection is also eliminat-
ed.
The massage is carried out with the patient wearing lightweight or normal
clothing. Clothing dye or hair dye can adversely affect the colour of the
rubber blanket. We recommend that a bath towel should be laid on top
(see Page 43 as well). Objects with sharp edges such as jewellery, belt
buckles, etc., can damage the rubber blanket and should be removed
beforehand.

Starting the massage

Caution!
It is possible to damage the nozzle trolley.
Only lie down on the device or leave it when it is at rest.
Note:
If and how the massage time can be selected depends on the
default settings – see Page 59.
– Setting up the massage time – see Page 45.
– Lay down on the unit.
– Select the type of massage you want and then press the start button.
Note:
While in operation, the fan in the base of the device is switched
on and off automatically.
Starting when using a chip-card
– Setting up the massage time – see Page 45.
– Insert chip-card.
– Lay down on the unit.
– Press the start button. The program stored on the chip-card will run
automatically.
Starting from the coin unit
– Set massage time on the coin unit.
– Lay down on the unit.
– Select the required type of massage or insert the chip-card.
– Press the start button.
39