Different Types Of Massage - Wellsystem RELAX Gebrauchsanweisung

Please read and observe ...

Different types of massage

A default program will run if a chip-card is used. If working without a chip-
card you must first activate the full body massage option in conjunction
with continuous massage after the machine has started. You can change
to another type of massage at any time, just by pressing the relevant
button.
Note:
Please open fold-out page 19.
Full body massage
The massage nozzles move backwards and forwards along the
entire bed during a full body massage.
Upper body massage
The massage nozzles are only moved backwards and forwards
over the upper part of the bed during an upper body massage.
Lower body massage
The massage nozzles are only moved backwards and forwards
over the lower part of the bed during a lower body massage.
40
Neck / shoulder massage
The massage nozzles are only moved backwards and forwards
over a section of the upper part of the bed during a neck / shoul-
der massage.
Massaging the lumbar area
The massage nozzles are only moved backwards and forwards
over a section of the upper part of the bed during a lumbar area
massage.
Section massage
The massage nozzles move backwards and forwards over an
area of approx. 20 centimetres during a section massage.
When setting up a full body massageone must wait until the
nozzles have reached the chosen body area before switching
over to a section massage.
Spot massage
The massage nozzles do not move during a spot massage.
When setting up a full body massageone must wait until the
nozzles have reached the chosen body area before switching
over to a spot massage.