Charging The Battery - Volpi KV220 Bedienungsanleitung

10.

Charging the Battery

•
Connect one end of the USB-C cable (10) to the pruner charging slot (9) and the other end to the charger (not supplied – a mobile phone charger can be used, after
checking the indicated output voltage in the technical specifications).
•
The red LED light indicates the battery is charging, the green LED light indicates it is fully charged.
•
Disconnect the cable after charging.
•
Make sure the battery is recharged at least every 3 months when it is not in use.
Percentage
76~100% Four green leds
51~75% Three green leds, one red LED
26~50% Two green leds, two red leds
11~25% One green LED, three red LED
0~10% Four red leds
Pag. 23 di 164
Indicator light