LG Hydro Kit IWT Bedienungsanleitung Seite 21

TEMPERATURE SETTING
21
TEMPERATURE SETTING
Controlling desired temperature
You can easily control to the desired temperature.
• In the main screen, press [<, > (left/right)] button to select the desired temperature category,
and press [∧,∨(up/down)] button to set the desired temperature.
- In the cooling, heating, and AI/auto mode, the desired temperature control is possible.
2021.02.04(Thu.) AM 10:39
M ode
Room Room temperature setting is available when remote room air sensor (sold
temperature separately) is installed
Room1 &
Temperature of Room 1 and Room 2 can be set respectively, when 2nd
Room2
circuit option is activated in installer mode.
temperature
If the desired temperature is lower than the water temperature, the heating
Leaving water
is not performed.
temperature
Set the desired temperature higher than the water temperature.
DHW tank
DHW tank temperature setting is available when DHW tank is installed.
temperature
This operation is changed to the temperature sensor only, the inlet
Water inlet
temperature sensor, and temperature control logic is the same as the leaving
temperature
water temperature operation.
NOTE
The function can be activated according to the installer setting.
NOTE
Room 1 = Circuit 2 = Mixing circuit
Room 2 = Circuit 1 = Direct circuit
2021.02.04(Thu.) AM 10:39
Description