Monitoring
In the main screen, you can enter the monitoring screen by pressing [Back] button
In the monitoring screen, you can check the following information,
- The room temperature
- The water inlet / outlet temperature
- The water pump operation
2021.02.04(Thu.) AM 10:39
In the monitoring screen, you can see the more information by pressing [OK] button.
- The flow rate
Returning to the screen
In the main screen, after moving to the category by pressing [<, >(left/right)] button, if there is no
remote controller operation, after 10 seconds, it returns to the main screen basic position. (basic
position: indoor temperature display part)
In the screens except the main screen, if there is no remote controller operation for 1 minute, it
moves to the main screen.
DESCRIPTION OF THE OPERATION
- The outdoor temperature
- The DHW tank temperature
- The Water pressure
OK
16