Using Extended Weighing Functions; Taring Additional Weight (Tare) - Seca 651 Gebrauchsanweisung

6.4

Using extended weighing functions

Taring additional weight (Tare)

1. Press the field.
Height
2. Enter the height.
3. Press the key to confirm your entry.
4. Press the key to clear your entry.
Device mode
Basic
Advanced
Expert
Service
Use the function to prevent an additional weight (e.g. a towel) from affect-
Tare
ing the patient's weight.
NOTICE!
Faulty measurement as a result of force shunt
If an additional weight, (e.g. a large towel) contacts the surface on
which the scale is placed, weight will not be measured correctly.
► Make sure that additional weights are only placed on the scale's
weighing platform.
✓
There is no load on the scale.
1. To activate the Tare function, proceed as follows:
a) Place an additional weight (here: 1 kg) on the weighing platform.
b) Press the key.
Tare
c) Wait until the value
Function available
and the message
0.00 NET
English
–
•
•
•
are displayed.
Operation • 105