Yamaha CNR-80 Bedienungsanleitung Seite 4

BEFORE PLAYING
Check for correct power voltage.
Consult your Yamaha serviceman regarding any..changes.
The power voltage is indicated on the nameplate at the back
side.
First of all, make sure that the plug is firmly inserted in the wall
power outlet, then:
1) Turn on the POWER.
The power indicator lamp will light up.
2) Slide the MASTER VOLUME control to the desired
position.
KA
Lo
3) Depress the Expression Pedal.
The Expression Pedal is used to control volume during
performance.
TO START PLAYING
PIPE JAZ. HARPSI- VIBRA-
ORGAN ORGAN PIANO CHORD PHONE
ロロ ロロ ロロ
FLUTE TRUMPET TROMBONE CLARINET VIOLIN
VOICE SELECTORS
This organ can be played with 10 different voices.
1) Press the selector corresponding to the instrument
voice you want to hear.
When the rightmost selector is in the "up" position (IU), you
can select the voices indicated in the top row. When it is in
the "down" position (sa), you can choose from the bottom
row of voices.
2) Adjust the volume level by sliding the MASTER
VOLUME control.
WAN
Zw
SN
て
T
T
ke?
WN
WASTER
—B
3) Press a key on the keyboard.
You will hear the instrument voice you have selected. Try
playing a simple melody which suits the voice.
x When two or more voice selectors are pressed simultaneously,
the right-hand selector always has priority.
* When no selector is depressed, the PIPE ORGAN voice will
be automatically selected.