Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING DATE, TIME AND MEASUREMENT UNIT
It is important to set the clock before using your blood
pressure monitor, so that a time stamp can be assigned
to each record that is stored in the memory. (The setting
range of the year :2018—2058 time format: 12H/24H)
1. When the monitor is off,
hold pressing "SET"
for 3 seconds to enter
the mode for year
setting.
Or when the monitor is off,
press "SET" button shortly,
it will display the time. Then
hold pressing "SET" button
to enter the mode for year
setting.
2. Press the "MEM" to
change the [YEAR].
Each press will increase the
numeral by one in a cycling
manner.
3. When you get the right
year, press "SET" to set
down and turn to next
step.Repeat steps 2 and
3 to set the [MONTH] and [DAY].
4. Repeat steps 2 and 3 to confirm the time format [12H] and
[24h].
5. Repeat steps 2 and 3 to set the [HOUR] and
[MINUTE].
6. Repeat steps 2 and 3 to set the [UNIT].
7. After the unit is set,the LCD will display
"donE"first,then display all the settings you have
done and then it will turn off.
7 I GB
Werbung
