Intended Use Of Instrument; Safety Instructions; Laser Classification - geo-FENNEL Selection PRO CrossPointer5 SP Bedienungsanleitung

EN

INTENDED USE OF INSTRUMENT

The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on instru-
ment): Setting up heights, horizontal and vertical planes, right angles.

SAFETY INSTRUCTIONS

· Follow up the instructions given in the user manual.
· Do not stare into the beam. The laser beam can lead to eye injury. A direct look into the beam (even from greater
distance) can cause damage to your eyes.
· Do not aim the laser beam at persons or animals.
· The laser plane should be set up above the eye level of persons.
· Use the instrument for measuring jobs only.
· Do not open the instrument housing. Repairs should be carried out by authorized workshops only. Please contact
your local dealer.
· Do not remove warning labels or safety instructions.
· Keep the instrument away from children.
· Do not use the instrument in explosive environment.
· The user manual must always be kept with the instrument.

LASER CLASSIFICATION

The instrument is a laser class 2 laser product according to DIN IEC 60825-1:2008-05.
It is allowed to use the unit without further safety precautions.
The eye protection is normally secured by the aversion responses and the blink reflex.
The laser instrument is marked with class 2 warning labels.
Please note:
If you return instruments for repair / for adjustment to us please disconnect batteries or rechargeable batteries
from the instrument - this is for safety reasons!
Thank you.
20
LASER RADIATION
DO NOT STARE
INTO BEAM
LASER CLASS 2
Max. output power
<1mW @ 635 - 670 nm
Laser class 2
DIN EN 60825-1:2008-5