Button Operation Instructions - Bluetti AC2P Benutzerhandbuch

12. Button Operation Instructions

Operation
Press the AC Power Button
Press the DC power button
Press the AC and DC Power
Buttons simultaneously and hold
for more than 2 seconds till the
output frequency flashes
Press the DC Power Button
in the Setting Mode
Press the AC Power Button
when the setting item is flashing
Press and hold the DC Power
Button in the Setting Mode
22
EN
JUST POWER ON
Function
Turn on / off the AC output
Turn on / off the USB-A,
USB-C, DC output
Enter / exit the Setting
Mode
Navigate through the
setting items
Enable or disable the
selected function
Switch the status page
Description
/
/
IIn the Setting Mode, the icons for the
currently enabled functions remain lit,
except for the flashing output frequency
icon.
If you do not perform any operation in
1 minute, the AC2P will automatically
exit the Setting Mode, and no changes
will be saved.
The flashing setting item is selected
and editable. In the Setting Mode,
the corresponding codes will be
displayed on the left side:
P01: Output Frequency
P03: Charging Mode
P04: Power Lifting Mode
P05: ECO Mode
P06: Bluetooth
/
You can view relevant information on
the status page.
: Serial Number
: Error code
: Historical faults
: Version