Crosscall STELLAR-X5 Schnellstartanleitung Seite 22

In order to ensure that your smartphone is charged properly and to avoid
damaging its battery, you should preferably use the USB-C/USB-C cable
(Crosscall reference: 1909140199976) supplied with your phone.
The power delivered by the charger must be between a minimum
of 5 watts, required by the radioelectric equipment, and a
maximum of 18 watts, in order to achieve the maximum charging
speed.
This device supports fast charging through electric power via its USB
port.
To protect the USB-C cable and the phone's USB-C port, we recommend
that you open the sealing cap and rotate it downwards by around 90°.
This simplifi es connection and prevents the sealing cap from exerting
continuous pressure on the cable and therefore on the USB-C port.
STARTING UP THE DEVICE
To switch on the device, hold down the On/Off button for a few seconds.
SETTING UP THE PHONE
To set up your phone, select your language and follow the instructions
displayed on the screen.
DATA TRANSFER BETWEEN YOUR OLD AND NEW PHONES
When starting up your new phone, the data transfer stage will
automatically be suggested during the initial confi guration steps.
1. Turn on your new phone, select the language you want to use, and click
on Start to begin setting up your new phone.
2. While going through these steps, connect your new phone to a mobile
or WiFi network. Both your old and new phones must be connected to the
internet
3. When you see the "Copy your apps and data" window, click on Next.
Option 1 of transferring data via an old device will be shown, click on Next
and follow the steps described in "Option 1: Use your old device".
If you don't have a cable or want to transfer your data via the Google app,
select "Don't have a cable?", then "Copy without cable". You can then follow
the instructions described in "Option 2: Use the Google app".
20