SSS Siedle Access-Server S Anleitung Seite 25

Optionally: Customize User rights
for user folders
If customer changes to the folder
user rights are requested or neces-
sary, these must be carried out in
accordance with customer's speci-
fication.
Procedure
1 In the navigation area, click on the
Users menu.
2 The Users menu opens up.
3 In the navigation area in the
opened Users menu, open the
folders affected by the change.
4 Check the user rights issued for
the affected folders and adjust these
in accordance with the customer's
specification.
Function test of the
Access system
Carry out a complete function test
of the Access system with all devices
and all set up functions. (Door call,
door dialling, door release, internal
call, external call, contacts, phone-
books etc.)
Generate and export a system
backup of the current system
Procedure
1 In the navigation area, click on the
System maintenance menu.
2 The System maintenance menu
opens up.
3 In the navigation area, click into
the opened System maintenance
menu on System backup.
4 The System backup page opens
up in the content area.
5 In the area Create system
backup, click on the button Create.
6 Read the notes contained in the
confirmation prompt and confirm
with Yes, if you wish to continue
with the backup.
7 The system backup is carried out.
The process can take some minutes.
8 The successful completion of the
system backup is confirmed with a
message.
9 In the area Restore / export
system backup, click on Export,
in order to download the manual
backup to an external storage loca-
tion.
10 The dialogue Open ... is dis-
played.
11 Select Back up file and confirm
with OK.
Handover to the customer
1 Recommendation: Create a new
label with the new hardware ID of
the Access server and exchange it
at the device for the previous hard-
ware ID.
2 Document the system handover in
this document.
3 Hand over all the hardware com-
ponents, files, this and other docu-
ments (EULA, COA...) which are
connected to this upgrade process
to the customer/operator/end user
of the Access system.
4 After handover, delete all the
upgrade process files from your
commissioning PC.
5 Inform the customer/operator/end
user that after handover of the
Access system, a new access pass-
word must be issued without fail
for the server operating system
and Access system which may be
unknown to you.
25