Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
The length adjustment of the cable
For the better use of this trainer, after long time use, the cable will be prolonged, there is
need to adjust the cable to the best condition.
The adjustment of the cable
1. Take off the front cover of the trainer.
2. If the cable is too long, use a three in one bolt fixed multiple block selector, use
the wrench 19*22 to loosen the M12 nut, then take off the pulley (note not to
change the cable direction),then turn the double pulley seat clockwise by 1-2
rounds, adjust the cable to appropriate length,at last assemble the pulley, fasten
the nut. As picture A.
Picture A when the cable is too
long
After long time use, the cable
might be worn and prolonged.
When the cable is too long,
can adjust double pulley seat;
when the cable is seriously
worn, need to change cable.
Werbung
