CONDTROL VECTOR 100 Bedienungsanleitung Seite 8

LASER DISTANCE METER
EN
Functions of buttons
Button Short press
Switch on the device
Switch on the laser beam
Single distance measurement
Subtraction
Down (in menu of functions)
Set response time in timer (decrease value)
Flip through measuremens in memory
(backwards)
Addition
Up (in menu of functions)
Set response time in timer (increase value)
Flip through measurements in memory
(forward)
Enter the menu
Stop measurement/clear/exit the mode/exit
the menu
+
Select measuring unit
simultaneously
OPERATION
Battery charging
Charge level is shown on display. Charge the battery when symbol
on the display. Use USB charger delivered in the set only. It is not recommended
to use the product while charging. It takes approximately 3 hours to fully charge
the batteries.
8 8
Vector 100 CONDTROL
User manual
Long press
Continuous
measurement
(tracking)
Change
reference point
Switch off the
device
appears