Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning
WARNING: Electrical shock and mechanical hazard.
Disconnect the electrical appliance from the power source
before cleaning.
WARNING: To ensure safe and efficient operation,
always keep the electrical appliance and the ventilation
slots clean.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Ventilation slots can be cleaned using a dry, soft non-metallic
brush and/or a suitable vacuum cleaner. Do not use water or
any cleaning solutions. Wear approved eye protection and an
approved dust mask.
Optional Accessories
WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
D
WALT ToolConnect™ Tag Ready (Fig. J)
e
Optional Accessory
WARNING: Use only original fasteners. Longer screws
increase the risk of electrical shock or damage to the tool.
Your D25966 comes with mounting holes
for installing a D
WALT ToolConnect™ Tag
e
T15 bit tip to install the tag with the provided screws
The D
WALT ToolConnect™ Tag is designed for tracking and
e
locating professional power tools, equipment, and machines
using the D
WALT Tool Connect™ app.
e
For proper installation of the D
the D
WALT ToolConnect™ manual.
e
Dust Extraction System (Fig. K)
The use of a dust extraction system is recommended to reduce
potentially harmful airborne dust and to prolong tool and
accessory life.
Consult your dealer for further information on suitable dust
extraction systems.
Protecting the Environment
Separate collection. Products marked with this symbol
must not be disposed of with normal household waste.
w
Products contain materials that can be recovered or
recycled, reducing the demand for raw materials. Please
recycle electrical products according to local provisions. Further
information is available at www.2helpU.com.
WALT-recommended
e
10
and screws
. You will need a
15
.
16
WALT ToolConnect™ Tag refer to
e
16
EnGLIsh
23
Werbung
