Technical Data - Meec Tools 023318 Bedienungsanleitung

EN
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Wear ear protection.
Wear safety glasses.
Wear safety gloves.
Use a face mask.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Torque
Speed
Torque settings
Chuck size
Material capacity
Wood
Weight
Sound pressure level, LpA
Uncertainty, KpA
Sound power level, LwA
Uncertainty, KwA
Vibration level
Drilling in steel
Uncertainty, K
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
32
18 V
70 Nm
0-500 / 0-1800 rpm
19 +1 drill mode
13 mm
Ø38 mm
1.2 kg
76.6 dB(A)
5 dB
87.6 dB(A)
5 dB
ah, D = 1.77 m/s²
1.5 m/s²
values have been determined in accordance with
EN 62841-2-1:2018.
WARNING!
The actual vibration and noise level when using
tools may differ from the specified maximum
value, depending on how the tool is used
and the material. It is therefore necessary to
determine which safety precautions are required
to protect the user, based on an estimate of
exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the
time when the tool is switched off and when it is
idling, in addition to the start-up time).
DESCRIPTION
1. Power switch
2. Torque setting ring
3. Gear selector
4. Rotation selector
5. Hook
6. Battery
7. Work light
FIG. 1
Battery and charger sold separately in Jula's
department stores and at www.jula.com.
ASSEMBLY
WARNING!
Switch off the drill driver and remove
the battery before checking, cleaning,
maintenance or adjustments, and before
changing accessories.
FITTING / REMOVING THE BATTERY
1. Remove the battery by pressing the button
on the front of the battery and by pulling
the battery from the drill driver.