Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Items supplied
1 base unit 2
1 grill plate 1
2 raclette pans 6
2 plastic spatulas 5
1 copy of the user instructions
5. How to use
FIRE HAZARD!
Place the device on a dry, level, non-slip
and heat-resistant surface.
The device must not be operated close
to flammable liquids or materials, or in
a potentially explosive environment.
Keep at a distance of at least 30 cm
from walls.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is related to materials
used on the heating elements during assem-
bly, and is not a defect with the device. En-
sure adequate ventilation.
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
• Clean the device prior to its first
use!
1. Remove any stickers present, but not
the rating plate on the side.
2. Figure A: place the grill plate 1 on the
two struts 9.
3. Turn the on/off switch 3 to O.
4. Insert the mains plug 4 into an easily
accessible earthed wall socket whose
voltage matches the voltage stated on
the rating plate.
5. Switch the on/off switch 3 to I to switch
on the device.
The integrated control light will then be
lit and the device heats up.
6. Leave the device switched on for ap-
prox. 25 minutes.
7. Turn the on/off switch 3 to O to switch
the device off again. The integrated
control light goes off.
8. Pull out the mains plug 4 and allow the
device to cool.
9. Clean the device again.
6. Operation
DANGER! Risk of injury
through burning!
The metal surfaces, heating element 7
and grill plate 1 become very hot dur-
ing operation. During operation, only
touch the handles and control elements
of the device.
6.1 Preparing device,
switching on and off
1. Choose a location that is firm, level and
non-combustible. Keep a distance of ap-
prox. 30 cm from other objects. The sur-
face on which the device is placed
should not be sensitive to splashes of
oil.
2. Figure A: place the grill plate 1 on the
two struts 9.
3. Oil the inside of the raclette pans 6 and
the top of the grill plate 1.
NOTE: use a kitchen towel with a little cook-
ing oil drizzled onto it.
4. Turn the on/off switch 3 to O.
5. Insert the mains plug 4 into an easily
accessible earthed wall socket whose
voltage matches the voltage stated on
the rating plate.
6. Switch the on/off switch 3 to I to switch
on the device.
19
GB
Werbung
