fillikid BFL306 Bedienungsanleitung Seite 7

2.2 Adjust the ISOFIX connector
Pic. 1
2.3 Fitting and releasing of ISOFIX connectors
CLICK
release
Pic. 2
2.4 The fitting methods of the car seat
ISOFIX + Adult safety-belt or Adult safety-belt only
2.5 Main loading point
Cr
ISOFIX rotation for easy storage.
As shown, hold down ISOFIX release button and ISOFIX adjustment
button by hand, meanwhile pull out ISOFIX connector .
The same way pulls out the other side ISOFIX connector.
lf you want to push back the ISOFIX connectors, repeat the process in
reverse.
1. Fix the ISOFIX system in the car seat following the instructions 2.3
ISOFIX connector is optional, you can ignore this step if you do not want
to use it.
2. Place the child seat on the car seat, push the booster cushion firmly
against the car seat backrest.
3. Let the child sit on the booster.
4. pull out the car seat belt, thread the car lap belt under the armrest then
across your child's hips, pull the lap belt and the diagonal belt together
through the other side of the armrest and buckle up.
Ensure that the diagonal belt is above the armrest. Tighten the lap belt
and diagonal belt. CAUTION! Ensure that the car seat belt is not tangles,
twisted or jammed in the car door or other car-parts.
5. To remove a child from the seat, release the seat belt buckle.
Be sure the distance between main loading
point and Cr is more than 150mm. Please
contact the child car seat manufacturer if in
doubt.
EN