Leica DMi8 Gebrauchsanweisung Seite 87

5. OperatiOn - COmbinatiOn methOd
5.15 Combination method
Leica DMi8 with motorized Transmitted Light method and
motorized fluorescence:
Depending on the configuration of your microscope, up to
two combination methods are possible:
FLUO/PH and FLUO/DIC
• On the Touch Screen, use the
contrast method.
• Insert a specimen.
• Select a suitable objective in the magnification menu.
• For the combination, select the contrast method FLUO-PH
or Fluo-DIC.
FLUO-PH:
• The current fluorescence filter cube is displayed on the
Touch Screen. If necessary, push the button for the de-
sired fluorescence filter cube.
• The illumination settings for the fluorescence and Trans-
mitted Light axis can be adjusted separately.
To do so, toggle between the using the TL/Fluor button.
FLUO-DIC:
• Switch between the two contrast methods by pressing
the FLUO-DIC key.
• In FLUO mode, the current fluorescence filter cube is dis-
played on the Touch Screen. If necessary, push the but-
ton for the desired fluorescence filter cube.
• In DIC mode, the DIC fine adjustment is made using the +
and – key.
Note:
The manual analyzer must be used for the FLUO/DIC meth-
od.
key to configure the
85