Concept VP4500 Bedienungsanleitung Seite 14

EN
PRODUCT DESCRIPTION
VP4500
1 ON/OFF button
2 Suction power mode button
3 Dust container with filter
4 Charging adapter
5 Short crevice nozzle with brush
6 Upholstery cleaning nozzle
7 Wall holder
8 Tube
9 Turbo brush
VP4520
1 ON/OFF button
2 Suction power mode button
3 Dust container with filter
4 Tube
5 Big turbo brush
6 Wall holder
7 Long flexible nozzle
8 Small turbo brush
9 Charging adapter
10 Upholstery cleaning nozzle
11 Short crevice nozzle with brush
VP4430
1 ON/OFF button
2 Suction power mode button
3 Dust container with filter
4 Charging station with adapter
5 Short crevice nozzle with brush
6 Upholstery cleaning nozzle
7 Long flexible nozzle
8 Small turbo brush
OPERATING INSTRUCTIONS
USE
1. When cleaning car interior, sofas, carpets etc., insert the upholstery cleaning nozzles into the main unit.
2. Press ON/OFF button to switch on the device.
3. Press the suction power adjustment button to change the suction mode.
4. When cleaning floors/carpets, insert the tube and the floor brush together into the body of the device.
5. Press ON/OFF button to switch off the device.
LIGHT SIGNALS
1. During charging, the white signal lamp will light on and continue flashing.
2. As soon as the charging has been completed, the signal lamp will light continuously.
3. When the device is being used, the signal lamp will light white.
4. When the battery is low, the signal lamp will be flashing white.
26
EMPTYING, CLEANING
1. When emptying dust, press the dust release button (see fig. A)
2. When cleaning of filters is needed, press the tank button (see fig. B)
3. Remove the filters and clean them (see fig. c)
Important: Before assembly, be sure the parts are dry.
Insert the filter into the dust container. Fit the dust container on the engine unit (use the reverse procedure than that
for disconnecting the dust container).
CHARGING FROM THE WALL HOLDER
The holder must be fitted on the wall using the screws in the bag.
Put the device to the wall holder.
Connect the adapter to the power socket. The device must always be switched off before its connection to the charging
adapter.
SERVICE
Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified service centre.
ENVIRONMENTAL CONCERNS
• Packaging materials and old appliances should be recycled.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan
Changes in text, design, and technical specifications are subject to change without notice and we reserve the right to
change them.
VP4500/ VP4520/ VP4430 VP4500/ VP4520/ VP4430
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used
electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). The symbol
on the product or on its packaging indicates that this product may not be treated as household
waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. The disposal of such material has to be
done according to the recycling regulations. For more detailed information about recycling of this
appliance see the authorized local office or service for household waste disposal or the shop, where
you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific
product.
EN
27