Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. When you enter the SPORT screen, MANUAL and RACE will flash. Press UP or DOWN buttons
to select MANUAL or RACE. Press ENTER button to confirm your selection.
(1) MANUAL (Fig. 3):
A. Enter into the MANUAL mode, press UP button to set the flickering figure of the TIME .Press
ENTER
button
DISTANCE→STROKES→CALORIES→PULSE→TIME immediately. (If you have set the target
value for TIME then DISTANCE can't be set, vice versa.)
B. Press START button to start, the STOP icon will disappear. Press ENTER button to select
functions.
C. When the function you have selected count backwards to ZERO or you have pressed the STOP
button, the meter will STOP and display the average figure. (If the target heart rate value is set, when
the user's heart rate value is higher than the target heart rate value, the meter will give an alarm and
the heart rate value will flash.)
(2) RACE (Fig. 4):
A. Select RACE mode and L9 will flash. The TIME/500M will display 4:00. Then, press UP or DOWN
button to select L1 ~ L15. Press ENTER button to confirm. Then, you can set the distance of the
race (500 ~ 10000M) while the value of DISTANCE is blinking. Press ENTER button, and the picture
of the race will display on the screen.
The TIME/500M of the programs are as follows:
L1
L2
L3
8:00 7:30 7:00 6:30 6:00 5:30 5:00 4:30 4:00 3:30 3:00 2:30 2:00 1:30 1:00
to
confirm
it.
L4
L5
L6
Then,
you
can
Fig. 3
L7
L8
L9
Fig. 4
14
press
UP
L10
L11
L12
button
to
set
L13
L14
L15
Werbung
