Herunterladen Diese Seite drucken

pewag Ice Star Montageanleitung Seite 20

Werbung

Warnings and instructions for use
Non-compliance with these warnings and instructions for use may lead to serious
accidents and substantial damage to persons and property!
No liability will be assumed for damages if caused by non-compliance or only
partial compliance with these instructions.
By using these traction chains you declare that you have fully noted and accepted the
warnings as well as the consequences of their non-observance. In the case of non-
observance you will waive any claims against manufacturer, importer or distributor.
1. Read the mounting instruction carefully and learn how to use the new chain with
a mounting test on dry ground.
2. The driving performance and handling characteristics of the motor vehicle may
be influenced by the use of traction chains (see also owner's manual of the
vehicle).
3. Traction chains may only be used if the vehicle and its tires including rim have
been approved for the use of traction chains by the respective manufacturer.
4. Traction chains may only be used for mounting on tires and driving on suitable
ground; they may not be used for towing, lifting or any other improper purposes.
5. The mounting instructions must be exactly observed in both mounting and
demounting of the chains.
6. Used chains must be subjected to visual inspection before they are mounted.
Do not use the chain if it is damaged or broken. In particular, do not mount the
traction chain if more than half of the wire thickness has worn off on even the
smallest area.
7. For mounting the chains, the vehicle must stand on level ground and be secured
as instructed in the owner's manual. Always used a pair of chains for each axle.
8. For your own safety please wear a safety west when mounting or demounting
the traction chain and consider applicable road traffic regulations in case of
towing.
9. Beware of the weight that traction chains have. Improper handling may lead to
injuries.
1 0. IMPORTANT! Watch your fingers, hands and hair when mounting or demoun-
ting the chains to avoid injuries caused by clamping or snapping back when
tightening and opening the tightening device. Maintain a distance as soon as the
wheel with the chain mounted starts moving.
1 1. Mount traction chains only on tire sizes listed on the tire dimension label on the
packaging. Chains are designed to fit new tires that comply to ETRTO-norm and
E

Werbung

loading