Scheppach HPC 1400 Originalbetriebsanleitung Seite 20

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manual
before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations
applicable to the operation of the product in your
country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
20 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (Fig. 1 + 2)
1. Bow-type handle
2. Holder for mains connection cable
3. On/off switch
4. Mains cable
5. Locking button
6. High-pressure hose connection
7. Holder for accessories
8. Holder for high-pressure hose
9. Water connection
10. Variable nozzle
11. Nozzle release button
12. Lance
13. Spray gun
14. Actuation lever
15. Unlocking knob
16. Spray gun high-pressure hose connection
17. Locking button
18. High-pressure hose
19. Water connection coupling
20. Screw
21. Nozzle cleaning needle
3. Scope of delivery (fig. 1 + 2)
Item Quantity
1x
1 1x
2 1x
7 1x
8 1x
10 1x
12 1x
13 1x
18 1x
19 1x
www.scheppach.com
Designation
Electrical high-pressure
cleaner
Bow-type handle
Holder for mains connection
cable
Holder for accessories
Holder for high-pressure hose
Variable nozzle
Lance
Spray gun
High-pressure hose
Water connection coupling