Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PREPARATION
•
Open the lid and remove the cabinet frame.
•
Fill the provided 36 icepacks with cold clean water.
•
Carefully introduce the filled icepack holders - the
icepacks turned to the outside of the cabinet - into
the lining compartment between the inner- and
outer cabinet. Watch out to introduce the holders in
the correct way and not to damage the evaporator
tubes!
®
icepack
•
holder
®
icepacks
•
fixing parts
®
•
fixing
latch
evaporator tube
•
6
Remove the icepack holders from the icepack-
compartment.
Insert the icepacks into the icepack holder (6 ice-
packs per holder) and fix them with the 2 fixing
parts.
To ensure the best transport of the cold from the
evaporator into the icepacks, the icepack holders
must be pressed firmly against the evaporator
tubes and fixed with the provided latches.
After all 6 icepack holders are inserted, replace the
cabinet frame and put the baskets in place.
cabinet
frame
Werbung
