Kenwood TK-760G-Serie Bedienungsanleitung Seite 23

2-Tone Signalling is enabled or disabled by your dealer. This function turns the
transceiver squelch OFF only when it receives the 2-tone signal that has been
set up in your transceiver. Transceivers that do not transmit the correct tones will
not be heard.
Your dealer may also activate Group Call for your transceiver. Ask your dealer
for details.
RECEIVING
When you receive a signal containing the correct tones, squelch turns OFF and
you will hear the call.
• "CALL" appears on the display and the LED indicator flashes orange.
• To mute the speaker after squelch turns OFF, press the key programmed as Monitor.
• Your dealer can program squelch to automatically turn back ON after a specific time period
elapses.
• If Transpond for 2-Tone Signalling is programmed, an acknowledgment signal is returned
to the calling station. Transpond for 2-Tone Signalling can transmit an alert tone only.
• If Call Alert for 2-Tone code is programmed, an alert tone will sound when the correct tones
are received.
TRANSMITTING
1 Press the key programmed as 2-Tone Encode.
• A pre-programmed 2-tone code name appears on the display.
2 Press the keys programmed as Channel Up and Channel Down to select
your desired 2-Tone code name. (TK-760G series/ TK-860G series only)
3 Press the PTT switch and 2-Tone Encode key to transmit and release them
to receive.
• When you release the PTT switch and the 2-Tone Encode key, squelch turns OFF and
the LED indicator flashes orange (depending on dealer programming). When you
receive a signal, the LED indicator alternates between green and orange. When the
signal drops out, the LED indicator flashes orange again. If no signal is received for a
pre-determined time, squelch turns back ON.
• Pressing the key programmed as Monitor at any time will turn the squelch back ON.
Note: The code for the TK-762G series/ TK-862G series transceiver is not selectable. You cannot
change the tone in step 2 by using the Channel Up and Channel Down keys.
2-TONE SIGNALLING
17