Inhaltsverzeichnis
Werbung
rapid charging procedure after the refreshing
operation.
Using the universal power pack for other small electric
appliances
The provided universal plug-type power pack can also
be used for operating other small electric appliances
with output voltages of between 3V and 12 V DC.
Select the right output voltage, polarity and output plug
for the device. You have eight different output plugs at
your disposal.
Never use more current than indicated on the
back of the power pack.
Observe the right voltage and polarity when
connecting the power pack to other small
electric appliances.
Non-compliance leads to the destruction of
the power pack and the connected electric
appliance. The guarantee will be null and void
in case of damages due to wrong connection.
Maintenance and care
Disconnect the charging set, the plug-in power supply
unit as well as the adapter from all power supplies prior to
any cleaning or maintenance. Only use a soft, dry clea-
22
Charging accumulators
- First insert the accumulators to be charged into the
charger (observe the correct polarity). 2 or 4 Mignon
or Micro accumulators may be charged at a time. A
single accumulator or three accumulators will not be
charged.
- Use the selector switch to choose the number of accu-
mulators to be inserted (2 or 4). If you charge 2 accu-
mulators place them in the two left-hand apertures.
- The charging set will now automatically change over
to the rapid charging mode. This is signalled by the
charging condition LED (LED on the right-hand side)
being lit red.
- As soon as the accumulators are completely charged,
the charger automatically switches to cyclic trickle
charge. This is indicated by the green light of the
charge state LED. You do not need to remove the
accumulators from the charger after the quick charge
process is completed. The negative-delta-U cutout
and the trickle charge function prevent the overchar-
ging of the accumulators.
19
Werbung
Inhaltsverzeichnis
