Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CoolTrans
Manual / Bedienungsanleitung
6.1.3 Control Information
If, during automatic operation mode, it is desired to know the current state, move to the "Info" level.
1. Return to the start page by pressing the "ESC" key
2. Press the "INFO" button
Repeatedly pressing the "INFO" button will guide you to the various "Info" pages.
The following data, e.g., may be polled:
6.1.4 Fault Messages
Legend
1 LED "Run" for displaying the operation mode of the device; whereas the following applies:
LED ON:
LED OFF:
2 Push-button
the following applies:
LED flashing:
LED ON:
LED OFF:
Press push-button to acknowledge fault or unlock
LED flashing
1. Press push-button
2. If LED is still ON, the fault has not been eliminated or it must be unlocked by pressing the push-
button again.
LED ON
1. Eliminate the fault.
2. If LED is still ON, the fault can be unlocked by pressing push-button
Unlocking a fault only becomes possible after eliminating its cause.
The control menu "Faults" displays which fault is currently awaiting attention. The following will be
displayed for each fault:
-
its cause, e.g., pump, control valve
-
its fault number
-
date and clock time of its occurrence
Main menu > Faults > Faults current
CoolTrans
Supply voltage available; no fault in application or periphery
No supply voltage
with LED (red) for displaying a fault message and its acknowledgement; whereas
Fault message ready for acknowledgement
Fault message awaiting attention, but not yet unlocked
No fault message
in order to acknowledge the fault.
01.998.362.0 / Ausgabe f
Room operating mode (scheduled, actual,
reason)
Timer
Cooling water – actual value and currently
effective scheduled value
Ambient humidity
displays which fault is currently awaiting
attention
>Fault history displays previous ten faults
.
page / Seite22/80
Werbung
