NovoPress ACO0203 Betriebsanleitung Seite 23

8 Commissioning and operation
8.1 Preparing the ACO103 BT
CAUTION!
Fingers risk being crushed if the device is operated without a press jaw
(Fig. 4)
If no press jaw is fitted, fingers could be placed in the at-risk zone. Fingers could be
crushed when the device is started.
Therefore:
–
–
Information!
The device will not start if the retaining pin (8) is incorrectly inserted. The green LED
flashes.
Information!
The press device is not suitable for continuous operation. Following 30 minutes
of continuous operation, a short break of at least 15 minutes must be taken to
allow the device to cool down.
Insert the press jaw into the press device as shown in Fig. 5 to 7.
•
Do not operate the device without the press jaws.
Keep your fingers away from the at-risk zone.
19
ACO103 BT
EN