Declaration Of Conformity - Eaton CWSA-04/01 Montageanweisung

Declaration of Conformity

We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility as manufacturer that the product (family)
Eaton - Weather Station
CWSA-04/01
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturer's
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU + 2015/863
based on compliance with following standard(s):
EN 300 220-2 V3.2.1, EN 301 489-1 V2.2.3, EN 301 489-3 V2.1.1,
EN 60669-2-5:2016, EN IEC 63044-5-1:2019, EN IEC 63044-5-
2:2019,EN IEC 63044-5-3:2019 , EN 63000:2018
Doc.Id.: CWSA-0401_250423
EU: Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
UK: Eaton Electric Ltd., P.O. Box 554, Abbey Park, Southampton Road, Titchfield, PO14 4QA, United Kingdom
Schrems, 25.04.2023
Gerhard Dischner
Director Operations
USA Eaton.com/contacts
Eaton.com/eatoncare Eaton.com/aftersales
+1 877-386-2273 Eaton.com/documentation
Friedrich Schröder
Director Quality
06.2023c / IL019302ZU
136211223
Eaton.com/recycling
6