Waeco BMW5500G RPA Bedienungsanleitung Seite 104

Operation
1. First fit the service hoses for the AirConServiceCenter to the vehicle
air conditioning system, and open the service couplings.
2. Press the cursor key  or  to access the basic menu.
3. In the basic menu, use the cursor keys  or  to select "Short
selection":
4. Press ENTER to confirm.
5. Use the keypad (8) and the cursor keys to enter the vehicle data.
6. Press ENTER to confirm.
7. Enter the refrigerant filling quantity. Use the value shown on the
filling quantities sticker in the vehicle and enter it using the keypad
(8) and the cursor keys and press ENTER.
The unit shows the following message:
8. Decide whether a UV medium should be added when filling up or
not.
9. Use the cursor keys  or  to select whether the air conditioning
system has two°connections (high pressure and low pressure) or
only one connection (high pressure or low pressure).
Press ENTER to confirm.
104
Short selection
Free selection
Other selections
ENTER-OK
CAR DATA
PLATE NR:
Filling value
by sticker
in the engine bay?
Refrigerant
ENTER-OK STOP-EXIT
WARNING !
UV-Tracer injection
phase?
HP/LP PORT
HP PORT
LP PORT
ENTER-OK STOP-EXIT
BMW5500G RPA
Yes
No
g.
Yes
No
EN