Waeco BMW5500G RPA Bedienungsanleitung Seite 125

Verfügbare Sprachen

BMW5500G RPA

"Service completed" displays the amount of service work performed

using the air conditioning service unit since the last reset (see date).

Entering the filter code

To reset the filter counter, you need to enter a 12-digit code. This special

code is located on the new filter. A "Code entry" prompt appears in the

menu. If a code is not entered, the unit is taken out of operation. Each

code only works once.

After changing the filter, perform a leak test with an approved testing

Service completed:

Service tasks