Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AUX OPERATION
There is an "AUDIO IN" socket located at the rear of the unit. Analogue
audio sound signals from other sources can be input to the unit through this
socket.
1. Connect the input to another audio device via an AUX cable (not
included) with an "AUDIO IN" socket.
2. Press the MODE button repeatedly to select AUX in mode.
3. Press the VOL +/– buttons on the unit or press the VOL +/– buttons on
the remote control to adjust the volume control for your desired sound
output level.
4. In AUX mode, operate your audio device directly for playback features.
SLEEP SETTING
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. To activate the sleep function, press the SLEEP button repeatedly. The
time will change in the below sequence on every press:
Sleep OFF
15MINS
2. When your desired sleep time appears in the display, stop pressing the
button and the sleep function will be activated in two seconds. " " will
show on the display. Also the time remaining until switch off is displayed
next to the symbol in the display.
3. When the sleep timer counts down to zero, the unit will turn to standby
mode. To turn the sleep function off while the sleep timer is still counting
down, press the SLEEP button repeatedly to select "SLEEP OFF". " " will
disappear from the display.
4. Press the SLEEP button once to show the sleep timer status on the
display when it is turned on.
Alternatively:
1. Press the MENU button on the remote control to display the function
main menu. Press the / buttons to select Main menu, and then press
the SELECT button to confirm.
2. Press the / buttons to select Sleep mode, and then press the SELECT
button to confirm.
3. Press the / buttons to select sleep timer, and then press the SELECT
button to confirm.
30MINS
45MINS
60MINS
EN
51
Werbung
