Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
40
Auto update
Set format
Set timezone
Daylight savings
The default auto time update setting is "Update from Network". If you would
like to manually set the time, it is recommended to turn the Auto update
function off.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play
mode.
1. During System settings mode, press the / buttons to select Inactive
Standby and then press the SELECT button to confirm.
2. The display will show : Off > 2 hours > 4 hours > 5 hours > 6 hours
3. Press the / buttons to select and then press the SELECT button to
confirm
Language
1. During System settings mode, press the / buttons to select Language
and then press the SELECT button to confirm.
2. Press the / buttons to change the display language of your choice.
3. Press the SELECT button to confirm..
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national
DAB+ stations in that area, your previously tuned channels may no longer
be available.
1. During System settings mode, press the / buttons to select "Factory
reset", and press the SELECT button to confirm.
2. Press the / buttons to select Yes, and press the SELECT button to
confirm or select No to cancel.
After the system reset, all the tuned stations, Internet, DAB & FM preset
stations will be erased.
Update from DAB / FM / Network or No
update.
12 / 24 hour format.
Select a time zone. (Only available when
Auto update from Network is on.)
Select daylight savings. (Only available
when Auto update from Network is on.)
Werbung
