Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Keep network connected
3. Press the BACK button on the unit or on the remote control to cancel the
setting and return back to the previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the
Internet, DAB+ or FM radio station with time/date information. You may
also adjust the Time/Date manually.
In System settings mode, press the / buttons to select Time/Date and
press the SELECT button to confirm. Press the / buttons to select Set Time/
Date and press the SELECT button to confirm.
1. The date digits will flash on the display.
2. Press the / buttons to adjust the day and then press the SELECT
button to confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
For the other settings under Time/Date, press the / buttons to select
from the following options and then press the SELECT button to confirm.
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network
with DHCP enable/disable.
Select PBC on the unit and press the PBC
button on the modem device that you
wish to connect with. Press the ENTER
button to continue.
Display the setting on the unit.
Select a country of your choice.
Select wireless network with DHCP enable/
disable.
Allows you to define a PIN number to be
entered before being able to connect the
device remotely over a network.
View the connected network..
Allows you to define whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.
EN
39
Werbung
