Siemens QAA73.210 Bedienungsanleitung Seite 11

1.2 - Access the lines 516 to 755
Access the settings list of the control unit LMU via
the sensor QAA73 and first level settings.
Touche
1
2
3
6 720 812 420 (2015/11)
Press the line selection buttons simultaneously for 3 seconds.
- You access the programming level of the LMU (level 4) for the end user.
- The number of the parameter line and its value are successively displayed.
Display :
Press another time the Info button for at least 3 secondes
- This will take you to the "user" level
- The "UtiL" level is displayed.
Display :
Util
By pressing the line selection button, choose the required operating level.
(UtiL = End-user/ INSt = Heating engineer / OEM = OEM)
Press the OK button to confirm your choice
- 2 -
To change the setting value, this value
!
should be flashing on the display.
Remarque
SET
°C
SET
°C
QAA73.210