Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. WI-FI CONNECTIVITY SETUP
5.1 Wi-Fi connectivity setup
You can connect your appliance to the home
wireless network and then link it to your
mobile device. This functionality allows you to
remotely control and monitor your appliance
using a mobile application.
To connect the appliance you need:
• Wireless network with the Internet
connection,
• Mobile device connected to your wireless
network.
Frequency/Protocol
Power
Encryption
Installing the mobile application
Take the following steps to connect the
appliance to Wi-Fi:
1. Make sure that the appliance is plugged
into a power socket and turned on.
2. Make sure that your mobile device is
connected to the same wireless network
you want to add your appliance to.
3. Download the dedicated application on
your mobile device from Google Play
(Android) or App Store (iOS) and install
the application on your mobile device.
4. Open the app and register to create an
account.
Configuring the appliance wireless
connection
Follow the instructions in the app to complete
the onboarding process:
1. Press and hold the Fridge and Freezer
temperature buttons on your appliance for
3 seconds.
2. The Connectivity indicator starts blinking
and
appears on Fridge temperature
indicator.
3. Continue to follow the instructions in the
app to complete the onboarding process.
Wi-Fi: 2.4 GHz / 802.11
bgn
Wi-Fi 2.4 GHz: <20 dBm
WPA-PSK, WPA2-PSK,
WPA3-Personal
4. The Connectivity indicator starts blinking
faster during establishing a connection.
After the successful onboarding, the
Connectivity indicator stops flashing and
becomes solid. If the connection failed, the
Connectivity indicator is off.
Press and hold the Fridge and Freezer
temperature buttons on your appliance
for 3 seconds to abort the connection.
Disabling the appliance wireless
connection
You can temporarily disable the Wi-Fi
connection. Press and hold the Fridge and
Freezer temperature buttons for 3 seconds.
The Connectivity indicator switches off.
Once the Wi-Fi connection is disabled, to re-
establish the connection press and hold the
Fridge and Freezer temperature buttons for 3
seconds. The Connectivity indicator switches
on.
The Connectivity indicator blinks during
establishing a connection.
Resetting the appliance wireless
connection
Take the following steps to reset the Wi-Fi
connection:
1. Check if Connectivity function is switched
on.
2. Press and hold the Fridge and Freezer
temperature buttons on your appliance for
7 seconds. The appliance beeps two
times.
3. The Connectivity indicator starts blinking
and
appears on Fridge temperature
indicator.
To re-establish the connection, repeat the
steps described in "Configuring the appliance
wireless connection" section.
ENGLISH
99
Werbung
