Sony SU-WL500 Installationsanleitung Seite 8

1
Install the LCD Monitor onto the
Base Bracket.
 Referring to the Screw and Hook locations
diagram/table on page 29, determine the
holes of the Base Bracket for latching the
upper hooks of the Mounting Hook.
 Hold the LCD Monitor securely with both
hands, and gently align it on the wall.
WARNING
• Be sure that two or more persons (three or more
persons for 85 inches and above LCD Monitor set)
hold the LCD Monitor when carrying it.
• When carrying the LCD Monitor, hold it in
landscape orientation, and take care not to drop it
when installing. Do not apply excessive force to the
LCD Monitor; otherwise, it may be deformed.
Mounting Hook
8
(GB)
2
Firmly secure the LCD Monitor
and the Base Bracket using the
screws supplied with SU-WL500
(+BVST4 × 12).
Note
• When using an electric screwdriver, set the torque
Be sure to tighten the securing screw firmly.
If you fail to do so, the LCD Monitor may fall
when it is pushed upward and cause injury.
Base Bracket
Screw
(+BVST4 × 12)
setting to approximately 1.5 N·m {15 kgf·cm}.
WARNING