Sony SU-WL500 Installationsanleitung Seite 14

Note
• Three or more people are required to detach the
Table-Top Stand.
• Be careful not to use excessive force while
detaching the Table-Top Stand from the LCD
Monitor as it may cause the LCD Monitor to fall
resulting in personal injury or physical damage to
the LCD Monitor.
• Take care when handling the Table-Top Stand to
prevent damage to the LCD Monitor.
• Be careful when lifting the LCD Monitor as the
Table-Top Stand is detached, the Table-Top Stand
may topple over and cause personal injury.
• Take care when removing the Table-Top Stand from
the LCD Monitor to prevent it from falling over and
damaging the surface that the LCD Monitor is
sitting on.
Step 5:
Installing the LCD
Monitor on the wall
WARNING
Be sure to complete the installation before
connecting the mains lead to the wall outlet. If
you allow the mains lead to be pinched under or
between pieces of equipment, this may result in a
short circuit or an electric shock.
Be careful not to stumble over the mains lead or
the LCD Monitor, as you may hurt yourself.
14
(GB)
1
Install the LCD Monitor onto the
Base Bracket.
 Referring to the Screw and Hook locations
diagram/table on page 29, determine the
holes of the Base Bracket for latching the
upper hooks of the Mounting Hook.
 Hold the LCD Monitor securely with both
hands, and gently align it on the wall.
WARNING
• Be sure that two or more persons (three or more
persons for 85 inches and above LCD Monitor set)
hold the LCD Monitor when carrying it.
• When carrying the LCD Monitor, hold it in
landscape orientation, and take care not to drop it
when installing. Do not apply excessive force to the
LCD Monitor; otherwise, it may be deformed.
Mounting Hook
Base Bracket