Husqvarna 325iRJ Bedienungsanweisung Seite 8

Introduction..................................................................... 8
Safety..............................................................................9
Assembly...................................................................... 16
Operation...................................................................... 17
Maintenance................................................................. 19
Troubleshooting............................................................ 20
Product description
This product is a battery operated grass trimmer/
brushcutter with an electrical motor.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Intended use
Use the product with a grass blade or a trimmer head to
cut different types of vegetation. Do not use the product
for other tasks than grass trimming and grass clearing.
Product overview
(Fig. 1)
1. Operator's manual
2. Bevel gear
3. Hole for locking pin
4. Trimmer head
5. Cutting attachment guard
6. Combination wrench
7. Loop handle
8. Knob
9. Shaft
10. Locking pin
11. Warning indicator (LED)
12. Start/stop button
13. Speed mode button
14. Power trigger lockout
15. User interface
16. Power trigger
17. Battery charger cord
18. Battery charger
19. Power and Warning LED
20. Battery release buttons
21. Battery
22. LED indicator for the state of charge
23. Warning LED
24. Battery indicator button
25. Grass blade
26. Support cup
8
Contents
Transportation, storage and disposal........................... 21
Technical data.............................................................. 21
Accessories.................................................................. 23
Declaration of Conformity............................................. 24
Appendix ....................................................................538
Introduction
Note:
National or local regulations can set limit to the
operation of the product.
Only use the product with accessories that are approved
by the manufacturer. Refer to
27. Support flange
28. Locknut
29. Transport cover
30. Harness
31. J-handle
32. Suspension point
33. Drive disc
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
XXXX /min
-1
or min
Accessories on page 23 .
WARNING! This product can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and understand
the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before the product is
used.
Use approved hearing protection. Use
approved eye protection.
Maximum speed or no-load speed.
Revolutions or reciprocations per minute.
1858 - 005 - 05.10.2023