Herunterladen Diese Seite drucken

Husqvarna 325iRJ Bedienungsanweisung Seite 19

Vorschau ausblenden Andere Handbücher für 325iRJ:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 97
2. Push the stop button. (Fig. 45)
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance
Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the start and stop button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
Make sure that all controls work and are not damaged.
Keep the handles dry, clean and free from oil and grease.
Make sure that the cutting attachment is not damaged. Replace the cutting
attachment if it is damaged.
Make sure that the cutting attachment guard or knife is not damaged. Replace
the cutting attachment guard or knife if it is damaged.
Make sure that the screws and nuts are tight.
Make sure that the battery release buttons on the battery works and locks the
battery in the product.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged and operates correctly.
Make sure that the suspension ring is not damaged.
Make sure that the locknut of the cutting equipment is tightened correctly.
Make sure that the transport cover for the blade is not damaged and that the
transport cover can be attached correctly.
Examine all cables, couplings and connections. Make sure they are not dam-
aged and free from dirt.
Make sure that the bevel gear is filled correctly with grease, see
on page 21 . If not, use Husqvarna bevel gear grease.
Make sure that the air intake of the motor is not dirty. Clean the air intake with
compressed air.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
1858 - 005 - 05.10.2023
Maintenance
Before you do any
3. Push the release buttons on the battery and pull the
battery out. (Fig. 52)
Maintenance schedule
WARNING:
you do maintenance.
The following is a list of the maintenance steps that you
must do on the product.
Technical data
Remove the battery before
Daily
Weekly
Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
19

Werbung

loading