OHAUS Valor 1000 Serie Bedienungsanleitung Seite 10

EN-6
1
2
3
4
5
Notes:
Short Press: Press less than 3 seconds.
Long Press: Press and hold for more than 3 seconds.
4.1 Using the Instrument
Weiging application:
1. If required, place an empty container on the pan and press Tare.
2. Add sample to the pan or container. The display shows the weight of the sample.
5. MAINTENANCE
5.1 Cleaning .1 Cleani
WARNING: Electric Shock Hazard. Disconnect the equipment from the
power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive
cleaning agents.
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
5.2 Service Information
For troubleshooting common problems, download the user manual from www.Ohaus.com.
If the issue persists, please visit our website for available support and service centers at
https://www.ohaus.com/en-us/support/service-centers.
Item Description
1
Battery charge symbol
2
Center of Zero symbol
3
Negative symbol
4
Stable weight symbol
5
NET symbol
TM
Valor 1000 Series