RADEMACHER DuoFern 2550 Original - Betriebs- Und Montageanleitung Seite 87

i
17. Erase all settings, software reset
If necessary, you can erase all of your settings and
return the RolloTron Swivel Winder Standard DuoFern
system to its original factory settings.
1.
Remove the cover plate from the setting buttons.
2.
+ + Simultaneously press and hold the
AUTO
buttons for 4 seconds.
3.
(red) In this process, the indicator light
rapidly flashes red.
4.
Release the buttons, subsequently the following set-
tings will be deleted:
◆ End points
◆ All of the registered DuoFern devices
In addition:
◆ The automatic functions are switched on
EN
87