RADEMACHER DuoFern 2550 Original - Betriebs- Und Montageanleitung Seite 75

i
12. Mounting the RolloTron Swivel Winder Standard DuoFern
1.
Slide the RolloTron Swivel Winder Standard DuoFern onto
the wall bracket from below until it engages.
The RolloTron Swivel Winder Standard DuoFern may
fall off again otherwise.
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is not pinched or dam-
aged during the mounting process.
2.
Re-insert the mains plug into the 230 V / 50 Hz socket.
Leave the bottom cover plate of the setting
i
buttons open until all settings have been
carried out.
WARNING! WARNING!
EN
75