English
This document describes the changed features of the camcorder introduced by
firmware version 3.1. Read the following instructions together with the Operating
Instructions (PDF format) stored on the accompanying CD-ROM.
Enhanced network security [all models]
Password configuration has been made mandatory when using the
network functions for enhanced network security.
• Configure a password using Network menu Access Authentication
Password.
• The Password field is blank when network functions are used for the first time.
• Password configuration is required to set and execute the following setup menu
items. If a password is not configured, the menu items are grayed out. If you
select a menu item that is grayed out, a "Set the "Password" of "Access
Authentication"." message appears for 3 seconds.
Thumbnail menu Transfer Clip
Thumbnail menu Transfer Clip (Proxy)
File menu All File Load Network Data
Network menu Wireless LAN
* Also, System menu Assignable Button NFC
Network menu AP Mode Settings
Network menu ST Mode Settings
Network menu Wired LAN
Network menu Modem
Network menu Network Client Mode
* Also, System menu Assignable Button Network Client Mode
System menu Assignable Button Intercom Level
* The intercom cannot be used without configuring a password.
The following item has been added to the target for Network Reset.
• Network menu settings information imported into the unit using the Load Utility
SD/MS function enabled when File menu All File Load Network Data is set
to On.
4