Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Controls
When you touch a symbol, the respective function is activated.
Notes
The settings will remain unchanged if you touch several
■
symbols at once. This allows you to wipe up spills on the
control panel.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Before using for the first time
In this section, you can find out what you must do before using
your Teppan Yaki to prepare food for the first time. Read the
Safety information section beforehand.
Cleaning
Clean the Teppan Yaki thoroughly with lukewarm soapy water
before first use.
Setting the Teppan Yaki
In this section, you can find out how to set the Teppan Yaki.The
table shows temperatures and cooking times for various meals.
Switching the teppanyaki on and off
The main switch is used to switch the teppanyaki on and off.
To switch on: Touch the
#
display above the main switch lights up. The teppanyaki is
ready to use.
To switch off: Touch the
#
main switch goes out. The teppanyaki has been switched off.
The residual heat display remains lit until the teppanyaki has
cooled down sufficiently.
Note: The teppanyaki switches off automatically when the
temperature setting remains at 0 for more than approx. 15
seconds.
Setting the temperature
Switch on the teppanyaki using the main switch.
1.
and the °C symbol light up in the temperature display.
‹‹‹
Set the required temperature on the settings range using the
2.
and
symbols.
@
A
Touch the
symbol.
@
3.
The temperature is set to 240 °C.
Or:
Touch the
symbol.
A
The temperature is set to 170 °C.
The
heating symbol lights up.
}
Once the set temperature has been reached, a signal sounds
and the
heating symbol goes out. Now you can place the
}
food onto the teppanyaki.
Note: The teppanyaki temperature is regulated by the heat
switching on and off. The heat may be switched on and off even
at the highest setting.
symbol. A signal sounds. The
symbol until the display above the
Residual heat indicator
The Teppan Yaki has a two-stage residual heat indicator.
If an
appears in the display, the Teppan Yaki is still hot. When
•
the Teppan Yaki cools down further, the display switches to
The indicator goes out when the Teppan Yaki has cooled down
sufficiently.
Heating the Teppan Yaki
To get rid of the new cooker smell, heat up the empty Teppan
Yaki. 30 minutes at 240 °C is ideal.
Selecting the warming setting
At the
warming setting, the appliance heats to 70 °C.
–
Switch on the teppanyaki.
1.
Touch the
symbol.
–
2.
The
symbol lights up in the temperature display.
–
Note: Do not attempt to keep excessively large quantities of
food warm. All food which is to be kept warm should be in
contact with the frying surface, otherwise it will cool down. Do
not keep food warm for too long, otherwise it will become dry.
Selecting the cleaning level
At the
¢
cleaning level, the appliance heats to 40 °C. This
enables you to leave the dirt to soak once you have poured a
little water and added a drop of washing-up liquid on the frying
surface (1 hour maximum). You can begin cleaning once the
dirt has begun to soften.
Switching Wipe protection on and off
When the appliance is in use, you can activate the key lock for
approx. 30 seconds using the Wipe protection function in order
to clean the control panel.
Touch the
"
symbol to switch Wipe protection on.
1.
Note: When Wipe protection is switched on, all symbols are
locked, except for the
"
symbol for switching off the appliance.
#
The displays above the
light up.
Clean the control panel with water and washing-up liquid.
2.
Touch the
symbol to switch off Wipe protection.
"
3.
Wipe protection symbol and the
"
symbol and above the
#
.
œ
symbol
15
Werbung
