Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14
14.
DISPLAY INDICATION
14.1 Current volume flow rate
During filling, the display shows the current volume flow, measured in
litres/hour. (Fig. 14.1)
14.2 Basic display without flow rate
In the basic display (without flow), the capacity - abbreviated with C -
is shown measured in litres. (Fig. 14.2)
By pressing the OK button afterwards, the remaining capacity (Fig.
14.3) is displayed:
14.3 Remaining capacity
The indication of the remaining capacity appears in the display - abbre-
viated with F - measured in %. (Fig. 14.3)
By subsequently pressing the ↓-key, the total volume (Fig. 14.4) is
displayed:
If the capacity of the cartridge is almost exhausted (range of the display according to fig. 14.3 at 10 -
1 %), the display shows the message: Cartridge nearly exhausted
If the capacity of the cartridge is completely used up, the display shows the message:
Cartridge exhausted
The cartridge must be replaced.
14.4 Total volume
The total volume appears in the display, measured in litres. (Fig. 14.4)
By pressing the OK button afterwards, the quantity of the last filling
(fig. 14.5) is displayed:
14.5 Quantity of last filling
The quantity of the last filling appears in the display, measured in litres.
(Fig. 14.5)
Fig. 14.1
Fig. 14.2
Fig. 14.3
Fig. 14.4
Fig. 14.5
Werbung
