Herunterladen Diese Seite drucken

Elka E 205 Montage- Und Betriebsanleitung Seite 5

Elektroschloss
Vorschau ausblenden Andere Handbücher für E 205:

Werbung

Elektrische Anschlüsse MO 36 bei Verwendung ohne Warnlicht
Direkt anschließbar über den Warnlichtanschluss und dem Haupttrafo der Motorsteuerung
MO 36.
Das Elektroschloss E 205 wird an die Trafoklemme der Hauptplatine (Sekundärseite des
Ringkerntrafos) angeschlossen. Die Zuleitung des Ringkerntrafos wird mit einer Ader über
den Warnlichtanschluss geschaltet.
Bitte stellen Sie die Vorwarnzeit in beide Fahrtrichtungen auf 4 Sekunden (Menupunkt P8).
Electrical connection MO 36 when using without warning light
Directly connectable through the warning light connection and the main transformer of the
controller MO 36.
Connect the electromagnetic bolt E 205 to the transformer clamp of the main board
(secondary winding of the toroid transformer). The supply of the toroid transformer is
switched over one conductor of the warning light connection.
Please set the pre-warning time for both directions to 4 seconds (learning sequence P8).
Connexions électriques MO 36 à une utilisation sans feu d'avertissement
Peut être connecté directement au raccord du feu d'avertissement et le transformateur
principal de la logique de commande MO 36.
Connectez la serrure électrique E 205 à la borne du transformateur de la platine principale
(face secondaire du transformateur à courant toroïdal). Connectez l'alimentation du
transformateur à courant toroïdal avec un conducteur au feu d'avertissement.
Réglez la durée de pré avertissement dans les deux sens de circulation sur 4 secondes
(point du menu P8).
© 06.03.2009 ELKA-Torantriebe GmbH u. Co. Betriebs KG
Seite 5
Elektroschloss E 205

Werbung

loading